Vintage Heuer Monaco Valjoux Caliber 7736 Chronograph

There are some movements that are made to last forever. Unfortunately, they are sometimes built along with Gaskets that were not. This iconic Heuer Monaco required the most labor I have ever put into a watch before even getting to the movement

Made famous by Steve McQueen, the Heuer Monaco became one of the most iconic, and easily the most recognizable chronographs ever made. In addition to its rarity and collectability, it also has a design flaw that has come to haunt it and its devoted collector base. Heuer decided to have this incredibly robust case clamp together with a gasket positioned adjacent to the crystal and dial (see picture below.) Old gaskets on many watches suffer melt (Bulovas, Zodiacs, Omegas, you name it, I’ve opened it and gotten melted rubber on my hands) but these gaskets are usually on the back, making it an easy clean up and never posing a threat to the delicate dial and hands. On the Monaco however, gasket melt poses no threat to the movement, but can and in many cases does ruin the dial (and the value.)

This watch had never been opened in its life. Upon close inspection I saw a thin black line on the edge of the crystal that indicated the notorious problem with these watches was indeed a reality. The gasket had melted. It is an incredibly sad thing to see such a stupid problem have such a rough impact on a piece such as this. Worse than the gooey mess that the melt leaves behind, the melted rubber is ever so slightly acidic, and so its contact with the dial can eat away at the finish and the metal. Incredibly the damage was minor given that this watch had been sitting in a box for 20 years. After carefully removing the melted rubber from the dial, the case was much easier to get to. A run through the ultrasonic cleaner and it was as good as new.

Before:

Heuer Monaco Gasket Melt Heuer Monaco Melt Clean-up Heuer Monaco Dirty Case

After:

Heuer Monaco Clean Dial Heuer Monaco Clean CaseHeuer Monaco Clean

Once done with the annoying, messy, and time-consuming task of the gasket clean up, I finally got to the movement. From the second I received this watch I knew that the movement was perfect. Valjouxs are easily the most reliable mass-used vintage chronograph movement. This Caliber 7736 was no exception. A full wind and a ride on the Timegrapher (a machine, or actually a fancy microphone, to check the time-keeping accuracy) indicated that this piece was maintained with care and was in pristine, like-new condition. The gasket melt, although treacherous on the dial, must have helped to form a hermetic seal that prevented even a speck of dust from getting in to the movement.

IMG_0051

Sometimes you take apart a movement to try and figure out what is wrong (repair), and sometimes (as in this case) you just try to not mess anything up but make sure its good to run for another couple years (maintain.)

I gave this a disassembly, cleaning, and oiling, and put it on the timegrapher again to make sure I didn’t screw anything up. Sure enough it ran just as well as before. After adding a new modern gasket, a new crystal, and a new band I could give my friend the assurance that his father’s watch was like new again. Although some of the dollar value had been hit by the melt of the gasket, the sentimental value of the piece was preserved.

Heuer Monaco Complete

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s